How do I fix error code E gF on a LG refrigerators?

1. undefined: Step 1: Check flow sensor connector in the machine room for loose or damaged connection. 2. undefined: Step 2: Measure flow sensor resistance: Red wire to Black wire. Expected: 4 ~ 30 kΩ. If outside this range, replace flow sensor. 3. undefined: Step 3: Check water supply — verify saddle valve is fully open and water pressure is adequate. 4. undefined: Step 4: Check water filter condition. Replace if older than 6 months or if indicator is illuminated. 5. undefined: Step 5: Check water line for kinks or blockage. 6. undefined: Step 6: If flow sensor resistance is correct and water supply is adequate, replace Main PCB. 7. undefined: Step 7: If water pressure is low (less than 20 psi), advise customer to contact plumber.

LG Refrigerators

Error Code E gF

Defect of flow meter or lack of water supply — malfunction of flow meter. Check connection of flow meter and water supply.

Moderate

Address soon - your appliance may not work properly

Also displayed as: E gF

How to Fix

1
Step 1: Check flow sensor connector in the machine room for loose or damaged connection.
2
Step 2: Measure flow sensor resistance: Red wire to Black wire. Expected: 4 ~ 30 kΩ. If outside this range, replace flow sensor.
3
Step 3: Check water supply — verify saddle valve is fully open and water pressure is adequate.
4
Step 4: Check water filter condition. Replace if older than 6 months or if indicator is illuminated.
5
Step 5: Check water line for kinks or blockage.
6
Step 6: If flow sensor resistance is correct and water supply is adequate, replace Main PCB.
7
Step 7: If water pressure is low (less than 20 psi), advise customer to contact plumber.

This Error Applies To

LG LRYXC2606 Series Refrigerators

Service manual exact match: LRYXC2606SService manual exact match: LRYXC2606VService manual exact match: LRYXC2606BService manual exact match: LRYXC2606D

Related Error Codes

E Id

Defect of freezer craft ice maker sensor — short-circuit or disconnection of craft ice maker sensor

E IC

Defect of Mini Cubed ice maker kit — malfunction of Mini Cubed ice maker motor

E rS

Defect of refrigerator sensor — short-circuit or disconnection of refrigerator sensor

E FS

Defect of freezer sensor — short-circuit or disconnection of freezer sensor

F dH

Defrosting failure — defrost sensor does not reach 40°F (5°C) within 80 minutes after defrost starts. Causes: disconnected thermal fuse, defective defrost heater, defective heater relay, drain tube blockage.

E FF

Defect of BLDC fan motor for freezer — no feedback signal from fan motor for more than 65 seconds

E IF

Defect of BLDC fan motor for ice compartment — no feedback signal from fan motor for more than 65 seconds. Causes: defect of BLDC motor connection, Drive IC, or TR.

E CF

Defect of BLDC fan motor for machine room — no feedback signal from condenser fan motor for more than 65 seconds

Need more help with your LG refrigerators?